Black Lamp Post 84" Long

Black Lamp Post 84" Long

Regular price $0.00 $0.00
Shipping calculated at checkout.
- +

Share this Product

3" Wide x 84" High
Fits Standard Postlights
Will Not Rust!
Decorative Cross Arm Included

Features
Decorates Outside of Your House
Will Not Rust
Made of Die-Cast Aluminum
3" Diameter X 84" Long
Fits Standard Post Light Fixtures

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING FIXTURES

—WARNING—

BEFORE INSTALLATION:

Check to see that you received all the hardware needed for installation and post was not damaged
during shipment. If you have a problem or are missing any parts, please contact us at CustomerService@touchandglow.com

CAUTION:

DISCONNECT POWER AT THE POWER SUPPLY FUSE BOX BEFORE STARTING INSTALLATION.

TO TURN OFF THE SWITCH ALONE IS NOT ENOUGH FOR YOUR SAFETY. NOT TO PROPERLY

DISCONNECT THE MAIN POWER SUPPLY CAN RESULT IN DEATH OR A SERIOUS INJURY TO YOU.

We do not warrant that this suggested method of installation meets your particular local building codes. Check local wiring codes of your town and we strongly recommend that for professional work you consult an electrical contractor before installing post. We strongly suggest that the portion of the post below ground level be applied with a coat of asphalt base coating due to alkaline condition of various concrete mixes and soils which can react to lamp post metallic surfaces and cause corrosion. 1 Dig a post hole 12’’-15’’ in diameter to the depth of 18’’ for 7-Ft and 8-Ft high posts. Allow extra depth for gravel.

(Note step 3)

After consulting your town local codes, dig a trench to the needed depth from the post hole to the power source. 2 Shovel several inches of gravel in the bottom of the post hole for drainage purposes.


CAUTION:
MAKE CERTAIN THE POWER IS TURNED OFF AT THE MAIN BREAKER OR FUSE BOX. Insert the UL-LISTED underground electrical cable as required from the power source into the inlet hole at the base of the post. Continue feeding the cable through the inlet hole to the top of the post, allowing sufficient leads length for splicing purposes. Place the post into the hole at the desired location and stabilize to “Vertical Level Position”. 4 Making sure that the bottom of the post is imbedded in the gravel, pour concrete to just below the wire access hole. MUST NOT pour concrete to ground level. When concrete hardens, it should be covered with at least 4’’ of soil or sod.

CAUTION:
Scratches or chipped paint as a result of abuse or by weed eaters, lawn mowers, or the use of certain chemicals and fertilizers can cause corrosion to the post.

WARNING
EXTREME CAUTION MUST BE USED IN SELECTING THE PROPER LAMP POST OR LIGHTING STANDARD

Selecting a lamp post or lighting standard for performance and safety requires a full understanding of various factors or conditions. Professional engineering assistance in selecting a post is highly recommended. The purchaser is responsible for meeting any and all local codes and requirements. If you choose a post without getting such assistance, you do so at your own risk. Many factors can affect the performance or safety of your post, including (but not limited to): Total weight of the fixture and all accessories the post must bear. The peak wind load and the effective projected area (EPA) of the mounted apparatus. Environmental characteristics including moisture, salinity, corrosiveness and other soil and air conditions and their possible effect on the type of post selected (e.g., the precise post material, diameter, length and wall thickness chosen) The maintenance factor for a specific application must be considered. The method of installation (e.g., surface mounted or direct burial in concrete). The possible exposure to vandalism or damage from nearby structure or equipment.

FAILURE TO CONSIDER ALL FACTORS RELEVANT TO PROPER POST SELECTION CAN RESULT IN FAULTY PERFORMANCE OR IN SERIOUS INJURY TO PERSON OR PROPERTY FOR WHICH BRIGHT IMAGE CORPORATION AND/OR IT AFFILIATES, REPRESENTATIVES ARE NOT AFFILIATES, REPRESENTATIVES ARE NOT RESPONSIBLE.
You may also like

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods